before and after
Our before and after case study section shows the huge difference a new staircase or balustrade can make to your property. From simply replacing outdated timber spindles with a new balustrade, to replacing the whole staircase itself, these transformations speak for themselves.
This before and after page will be updated with new projects as we get them photographed.
Our clients had just completed their dream kitchen but were unhappy with the new staircase (above left). The angular shape and design did nothing for the space and the bottom step was too high. After deciding they couldn’t live with it, they contacted Bisca to ask for advice.
Richard visited the property, surveyed the timber staircase and spoke at length with the clients about possible solutions. The option chosen was to remove the staircase completely and design a modern steel, walnut and glass stair – reflecting materials in the kitchen.
Chalfont St Giles
A floating ash staircase replacing a traditional timber stair in a 1930’s property.
Despite renovating every room in the house, the hallway remained dark and oppressive. The staircase, at odds with the new ash flooring, absorbed light and looked dated.
Our design proposed a floating staircase to maximise light flow. Slim open treads of ash teamed with low iron glass gives a contemporary clean look. At the top of the staircase, we suspended the top three treads between two glass panels, thus giving a floating effect.
By extending the new staircase future towards the window, the going is a little easier. Adding a winder onto the bottom of the stair length turned the staircase and made it easier to get on and off.
Upstairs the difference is as dramatic. Dark, chunky newel posts and spindles have been replaced with a sleek glass balustrade, letting through light and making the landing area look instantly bigger and brighter.
The staircase transformed the hallway and made the property renovation complete.
The existing timber staircase of angular sections and heavy posts dominated the entrance hall of a lovely village property. Although of good quality, the staircase had clearly not been designed with form or function in mind and the new owners found it to be a physical and visual obstruction when moving between rooms.
As a replacement, Bisca designed a sleek contemporary staircase with cantilevered open treads supported by hidden steel plates within the wall. A low iron glass balustrade, made up of only two panels is capped by a profiled Oak handrail slotted on top of the glass. The balustrade and handrail continues onto and around first floor landing galleries, also by Bisca.
Tread end caps cut from the same length of timber as the tread have a continuous grain, and thus the treads appear to be through the glass.
Bisca were called in to look at this rather awkward, angular concrete builders staircase (left) in a prestigious new build. Apart from the fact it was too mean and small for the space, it had been cast so that it clipped the door entry; the going was too short, rendering it uncomfortable in use, and any attempt to clad the bare concrete on the landings would have made both landings non compliant with building regulations. We had no alternative but to rip it out and replace with an elegant semi-helix of English Oak and hand forged, formed and textured steel.
Our brief was to design a light, spacious and modern staircase maximising the use of space in a farmhouse refurbishment. Our scope include a galleried landing area and library as well as an existing doorway to be replaced with a feature window with hidden blind.
Our solution was a slim, elegant and visually lightweight staircase structure supporting oiled English oak treads. Glass balustrades are structurally rebated into the treads with a continuous oak handrail rising from ground floor and along the gallery.
The structure itself is subtly conventional in appearance, whilst the glass balustrade is in keeping with the large window (also installed by Bisca) and retains the illusion of space.
Our brief was to design a staircase to open up the entrance area of a listed clock tower to form a more functional and useful access and replace the dated angular timber staircase.
Our solution was a slim, elegant and visually lightweight structure supporting oiled English Oak treads, finished with a glass balustrade and a hand carved oak handrail.
The structure itself is subtlety conventional in appearance for integration into the existing style and period of the property but the glass balustrade maximises light transfer from first floor down to ground floor imparting an illusion of greater space.
Our brief was to renovate the existing dated timber staircase with its heavy stained paneling, dark timber spindles and chunky square newel posts.
The clients wanted a mix of contemporary elegance, functionality and practicality using glass and oak to create simple clean lines opening up the room downstairs and landing space upstairs
Our design included a sweeping white painted soffit to make a feature of the underside of the staircase. On the staircase itself the old newels were reduced lessening the visual impact on the open space.
A low iron glass balustrade was fitted to the existing newly white painted stringer and new landing edges, and was completed by a slim oval profile handrail continuing up and along the landing edge balustrading.
Our clients had embarked on an ambitious project to totally restore and update a substantial 1960’s suburban villa in leafy backstreets of a city.
They were happy with the overall shape of the staircase which was structurally sound but wished to replace the traditional, outdated and heavy dark stained wood which formed the balustrade and landing gallery.
During our survey we discovered the bottom three treads were non compliant with building regulations but saw this as an opportunity to both solve the compliance issue and create a beautiful new feature base to the staircase.
The stair was totally reclad in pale Oak and finished with a hand forged, blackened ornate balustrade which continues up the staircase and along the landing edges. The balustrade is capped by a hand carved oak handrail with a scroll end.
This stunning staircase in a converted barn won both Build It Award for Best Joinery Product and Northern Design Awards for Product Design in 2015
The client called us in after scouring the internet to find a staircase specialist that offered truly bespoke staircases as she wanted a staircase that would be a sculptural masterpiece of both form and function.
The staircase, in a converted cow byre (Shippon), is of green oak and was inspired by the mediaeval beams in the existing building. Great care was taken in design, material sourcing and installation to ensure the staircase is in empathy with the building in every aspect. We skilfully interfaced new and old timber joists and managed to design hidden support what was essentially a ‘rubble and fill wall’.
On the first floor the staircase leads to a bridge and study gallery with glass balustrade and leather handrail to match that of the staircase.